High Precision Cnc Mill

Machine parameter 

The high precision cnc mill conforms to the ergonomic interactive interface, and cooperates with the servo drive to complete the high-precision milling processing requirements. The high precision cnc mill conforms to the ergonomic interactive interface, and cooperates with the servo drive to complete the high-precision milling processing requirements. Adopt high speed speed up to 12000rpm, high precision angular contact thrust ball bearing, high rigidity, strong axial and radial bearing capacity
Taiwan brand high-speed, high-precision, high-rigidity spindle unit, strong axial and radial bearing capacity, speed up to 12000RPM;
The main shaft adopts the central air blowing structure, and the inner cone of the main shaft is cleaned by the central high-pressure air quickly after the main shaft releases the tool, so as to ensure the precision of the tool clamping.

Taiwan brand line guide ensures machining accuracy, long service life of the machine tool, silver screw rod, high-speed feed, high operating efficiency, low heat generation, and high-speed feed.
The X, Y, and Z direction guide rails and lead screws are all sealed and protected, which effectively ensures the cleanliness of the lead screws and guide rails, and ensures the transmission and motion accuracy of the machine tool.

Oil Lubrication System
Japan River Valley/HERG
Japan Kawatani automatic lubrication device is adopted to implement forced lubrication for each sliding surface and ball screw
·The oiling time interval and the amount of oiling can be adjusted
When the oil level is too low (lack of oil), the machine will display an alarm. The lubricating oil is T68# guideway lubricating oil.
· Lubricating box volume 2 liters
Lubricating motor power 150W, system maximum pressure 5KG/CM2
The whole machine covered lubrication system is equipped with pure copper large-diameter oil pipes. Oil separators are installed on the workbench, column, guide rail and other machine tool components. The automatic intermittent lubrication of timing and quantity can efficiently lubricate every detail and work continuously. Stablize.

Good quality and long life

high precision cnc mill  base, sliding seat, workbench, column, headstock and other main basic parts are made of high rigidity cast iron structure, and reinforcing ribs are distributed inside the base, and the sliding seat is a box structure, effectively ensuring the high rigidity and resistance of the basic parts. Bending shock absorption performance; the basic parts are molded with resin sand and subjected to aging treatment, which provides a guarantee for the accuracy and stability of the machine tool.

Quenching treatment workbench
It can improve the strength, hardness and wear resistance of the workpiece and prolong the service life. The vertical machining center with quenched workbench and guide rail is more stable in terms of high rigidity, high precision and hardness.

cast bracket
Thick stainless steel inner protection
The internal defense is made of 304 stainless steel. The outer sheet metal is 2 mm thicker, and the safety is higher with GFRP glass. The cast inner protective bracket is not easy to deform and is more firm for use.

Imported bearings
Imported bearings from Japan's NACHI, NSK and Taiwan's TPI are used, with high stability and stronger rigidity.

· .·
1 Machine Tool Accuracy Standard-
JB/T8771.2-1998
"Vertical Machining Center Geometric Accuracy Inspection"
JB/T8771.4-1998
"Linear Positioning Accuracy and Repeat Positioning Accuracy Inspection of Machining Center"
JB/T8771.7-1998
"Accuracy Inspection of Finishing Test Pieces in Machining Center"
JB/T8801-1998
"Technical Conditions of Machining Center"
Positioning accuracy: soil 0.007mm
Repeat positioning accuracy: ±0.003mm
-Machine structure-
The high precision cnc mill is designed and manufactured in compliance with ISO international standards
The six basic parts of the machine tool (base, saddle, table, column, spindle head)
Following the design principle of "thin-walled high-strength", high-strength cast iron is used, and the structure is optimized to have high static rigidity.
Electrical system-
Conforms to GB/T5226.1-1996 "Industrial Machinery and Electrical Equipment Part One: General Technical Conditions" standard system has perfect interlocking, safety protection and fault self-diagnosis and alarm functions, equipped with RS232 standard communication interface, and can be programmed by computer floppy disk Storage can choose other systems according to user requirements

人気ラベル: high precision cnc mill, China, suppliers, manufacturers, factory, price, for sale, made in China, アクリル接着剤ディスペンサー, CNC垂直ミリングのプログラミング, CNCミリングマシンの評価, 床スタンドCNC垂直ミリングカッター, 接着剤の分配ポンプ, 製造プロセスのためのCNC加工